egpco

egpco

شرکت ابداع گران پدیده، بعد از مدت‌ها تحقیق، بررسی و همکاری با پژوهشگاه صنعت نفت، محصول جدید آلومینیوم جکتینگ خود را، با آستر پلی‌سرلین، تحت شماره 99639 ثبت اختراع نموده‌است.

 

آسترِ پلی‌سرلین (PSMB)یک فیلمِ کواکسترود شده (co-extruded) متشکل از سرلینِ دوپونت (DuPont™ Surlyn®) و پلیمرهای دیگر است. استفاده از این آستر، به عنوان جایگزینی به جای آستر پلی‌کرافت، در حال گسترش در جهان است. پلی‌سرلین در مقایسه با پلی‌کرافت، مقاومتِ بالاتری در برابر نفوذِ رطوبت نشان داده و از آنجایی که در فرآیندِ تولیدِ این آستر کاغذ به کار نمی‌رود، استفاده از این پوشش از ایراد خساراتِ مالی ناشی از خوردگیِ میکروبی جلوگیری می‌کند.

آستر پلی‌سرلین با ممانعت از وقوع خوردگی در زیر جکت و نهایتاً زیر عایق، دوام سیستم‌های عایق‌کاری را افزایش می‌دهد.

 

 

1418.01.17

 E.G.P. attended thirteenth  Iran Plast International Exhibition which took place on 22-25 September 2019 at Tehran international permanent fair ground

 

For the virtual tour click here.

 

IMG 4731

 

Untitled 1

 

Untitled 2

 

Untitled 3

 

IMG 4779

 

IMG 4790

 

IMG 4787

شرکت ابداع گران پدیده در سیزدهمین دوره نمایشگاه ایران پلاست حضور یافت. این نمایشگاه در تاریخ 1398/06/31 لغایت 1398/07/03 در محل دائمی نمایشگاه های بین المللی تهران برگزار شد.

 

برای تور مجازی غرفه شرکت ابدا‌ع‌گران‌پدیده در نمایشگاه ایران پلاست 1398 اینجا را کلیک کنید.

 

 

IMG 4731

 

Untitled 1

 

 

Untitled 2

 

Untitled 3

 

IMG 4779

 

IMG 4790

 

IMG 4787

شرکت ابداع گران پدیده در بیست و چهارمین نمایشگاه نفت، گاز، پالایش و پتروشیمی ایران که 11 الی 14 اردیبهشت ماه 1398 در محل دائمی نمایشگاه های بین المللی تهران برگزار شد، حضور یافت. 

 

 

IMG E1282

 

IMG E1296

 

IMG E1383 

 

IMG E1224

 

IMG E1219

 

 

 بازدید جناب آقای مهندس زنگنه، وزیر نفت کشور از غرفه شرکت:

IMG E1332

 

IMG E1336

 

VPSL1275

 

WBZGE5944 

 

بازدید جناب آقای مهندس سعید محمدزاده، معاون وزیر نفت در امور مهندسی، پژوهش و فناوری از غرفه شرکت:
IMG E1317

 

IMG E1319

 

 

Thursday, 20 March 0780 11:02

Three-layer Polyethylene & Polysurlyn Films

skin packaging

 

In today's fast-paced transforming world, packaging companies play crucial role. Most producers believe that as long as their product is high quality there is no need to worry about packaging; however, the look and quality of packaging affect sales. Packaging should also keep products safe from outside elements.

Essential Factors to Consider When Choosing Packaging Material

  • Weight-bearing, impact resistance and resistance to tearing or cracking
  • Resistance to temperature and moisture
  • UV protection for sensitive products

We offer different 3-layer films:

  • Polysurlyn shrink and skin/stretch film
  • Laminated film used in Doypack, sachet, shopping bag, Tetra Pak , etc
  • Anti bacterial, anti-UV, anti-static films
  • Light/heavy duty bags
  • Polyethylene 3-layer FFS films

Polysurlyn Film

Polysurlyn is derived from Surlyn -a transparent and solid resin- which makes the packaging completely sealed against moisture.  Its high melting point allows use of higher temperature in packaging process.

According to our studies and practices, polysurlyn film produced by E.G.P. has qualities as follows:

  • It is waterproof.
  • Does not discolor, tear in contact with water.
  • Is scratchproof.
  • It is durable and resistant against wide range of natural hazards.

Suitable Application of Polysurlyn Film

  • Packaging industrial goods and delicate electronic parts
  • Shrinking components and products sensitive to moisture
  • Food packaging

Skin/Stretch Packaging Film

Both skin and stretch packaging shows products clearly for maximum shelf appeal, helping increase sales. It also eliminates missing components and reduces the risk of items being separated from the rest of the order. Skin/Stretch packaging offer significant weight and volume reduction compared to traditional packaging without sacrificing performance. Packaging odd shaped goods with traditional packaging methods requires much more material and space but with Skin/Stretch packaging you can package the oddest shaped goods easily because the skin film shrinks tight on product. It also allows a low ratio of packaging to product, which can provide substantial savings in product transport, reduce their source material leading to less waste and more sustainability.

Advantages of Using Polysurlyn Film in Skin/Stretch Packaging

  • Faster Processing: Surlyn absorbs infrared heat at about twice the rate of polyethylene. Its ability to soften more quickly in the heating phase speeds up the whole packaging process.
  • Cost efficient.
  • Surlyn’s high melting point makes use of higher temperature possible.
  • Better Puncture and Abrasion Resistance: Films made of Surlyn® are not easily punctured by pointed objects and sharp edges, especially during the critical forming stages of the packaging cycle.
  • Better chemical resistance
  • Cold-Weather resistance
  • Prevents metal corrosion

Shrink Film

Shrink film, aka shrink wrap, is a transparent material made up of polymerplastic film and is used in shrink machine. The film is applied over or around the intended item according to its size and shape; then the product is sent through a shrink tunnel for heating. When heat is applied to shrink film, it creates a very tight seal over whatever it is covering. Not only is it easy to use, but it offers a wide range of benefits as well: Versatility (with shrink films you can package just about anything, regardless of size), high durability, difficult to tear or puncture, can be designed with colors...

Shrink wrapping is one of the easiest and most affordable ways of packaging today and polyethylene is the most common material used for shrink films.

E.G.P.’s shrink wraps are one to three layer films made up of polyethylene or other polymer plastics. We can modify its thickness upon request.

Benefits of Using E.G.P.’s Shrink Films

  • High transparency
  • High durability
  • High level of free shrink (shrink-ability)
  • Even thickness

Common Applications of Shrink Films

  • Supermarket (Water, soda bottle packs, cans…)
  • Food industry (fruit, vegetable, meat…)
  • ·Medical and pharmaceutical packaging
  • Construction industry (tiles, bricks…)
  • Automobile industry (different car components)
  • Boxes

The Difference between Shrink and Stretch

Shrink film and stretch film are often confused, as they look very similar and as mentioned above, can both be made of polyethylene. However, they each perform very differently:

A shrink film is loosely placed over a single item or multiple items around which it will shrink when heat is applied, creating a tight, tamper-resistant seal of protection.

A stretch/skin film is formulated to be able to stretch around items. The elastic-memory of the film, along with its ability to cling to itself, keeps a tight layer of protection around the items.

Polyethylene FFS (Form-Fill-Seal) Three-layer Films

A special kind of heavy duty bags are fabricated using FFS (Form, Fill & Seal) films. Three layered blown FFS films are highly consumed in heavy sack packaging and petrochemical industries. Applying polyethylene bags compared to other materials (propylene, paper,…) uses less energy, reduces waste and greenhouse gas.

Main Applications of FFS 3-layer Films

  • Powder or pellet (petrochemical products) packaging
  • Chemical fertilizers packaging

1

بازدید شرکت پالایش نفت اصفهان و شرکت نفت پاسارگاد از غرفه ابداع گران پدیده

2

 

بازدید شرکت پتروسینا آریا از غرفه ابداع گران پدیده

3

 

 6

 

7

 

8

 


Visit of Marzie Shahedai, managing director of Petrochemical Industries National Company and deputy of Oil Ministry from E.G.P. booth


Visit of Qolamreza Manouchehri, deputy of Oil Company from E.G.P. booth


A group of Russian visitors:
Ms. Elena Mironova, Vice-President of Perm Chamber of Commerce and Industry
Mr. Ashot Parsegov, Deputy Director of USP Co.
Mr. Dmitry V. Birkovsky, Finance Director of New Fittings Technologies Co

.
Visit of Moeini, chairman of electronic system of oil ministry resources


Visit of Mohammad Lak, managing director of Petrokaran Shafaqe Kish from booth

 

polysurlyn

PolySurlyn Moisture Barrier(PSMB)

 


Ebdaagaran Padide Co., after many years of research and in order to comply with the latest global standards, introduces " PSMB " (Polysurlyn Moisture barrier) as a replacement for "PMB" (Polykraft Moisture Barrier.) This new product, in addition to being an environmentally friendly product, will prevent huge financial damages caused by " MIC "  (Microbiologically Influenced Corrosion) and "CUI" (Corrosion Under Insulation) to equipment used in petrochemical utilities, power plants and refineries.
According to existing statistics, for producing 1000 kg of paper, 15 trees need to be cut. Trees which are considered to be the lungs of our beautiful planet and ensure the health of our atmosphere.

In response, Ebdaagaran Padide Co. introduces its new aluminium Jacketing product with Polysurlyn layer for the first time in Iran.

Polysurlyn is resistant to corrosion under jacketing of metal pipes and equipment. When there is moisture in atmosphere and the metal jacketing is in contact with it, corrosion is inevitable. This phenomenon will occur in any type of implementation (cold, hot, over-the-roof, industrial, and commercial) regardless of the type of insulation.
Polysurlyn used in hot or cold implementations of pipes and storage tanks will act as a barrier to corrosion of internal layer of the jacketing and galvanic corrosion of jacketing, pipe or hot-implemented equipment. Meanwhile, using this polysurlyn 3 layer film (polysurlyn moisture barrier) will prevent formation of pin holes on internal layer of metal jacketings.

Polysurlyn advantages include:
-    Low water absorption in comparison to polykraft paper.
-    No color change, no tearing and no destruction while in contact with moisture.
-    Resistant to scratching during installation.
-    High durability and resistance to a wide range of environmental factors threatening metal jacketings with PSMB layer with ASTM E84 and with a fire resistance rating of >25/50.
-   Aluminium jacketing with PSMB layer are in compliance to ASTM C1729 Class A standard.
-    PSMB can be considered as a small investment and as insurance for protection of valuable metal jacketings and pipes.
-    Metal jacketings will be corroded unless Polysurlyn is used.

 

Polysurlyn PolyKraft
Three layers of co-extruded film   Two layers (PE+Paper)
Omitting pin holes will cause water resistant properties Pin holes will cause contact of moisture with metal
No water absorbing, therefore no contact between metal and water The layer is in contact with paper which is an water absorbent in itself

در دنیای امروز که به سرعت رو به پیشرفت است، نقش شرکت های بسته بندی بسیار پر رنگ تر شده است. اغلب تولیدکنندگان بر این باورند، که کیفیت محصول، از بسته بندی مهم تر است؛ در حالی که، ظاهر و کیفیت بسته بندی هم از عوامل تعیین کننده در فروش کالا است. در امر بسته بندی، علاوه بر ظاهر، محافظت از محصول دربرابر صدمات احتمالی نیز، اهمیت دارد.

ویژگی های کلیدی در انتخاب جنس مواد بسته بندی، عبارتند از :

  • تحمل وزن و مقاومت در برابر ضربه و سوراخ شدن.
  • مقاومت در برابر دما (سرما و گرمای محیط) و رطوبت.
  • حفاظت از محصولات حساس در برابر تاثیر منفی نور خورشید .

 

انواع فیلم های سه لایه تولیدی شرکت ابداع گران پدیده:

  • فیلم شرینک، اسکین و استرچ پلی سرلین
  • فیلم لمینتی مورد استفاده در لامینه دوی پک، ساشه، شاپینگ پک، تتراپک و ...
  • فیلم های آنتی باکتریال، آنتی UV، آنتی استاتیک و ...
  • کیسه های حمل مواد سبک و سنگین
  • فیلم های پلی اتیلن سه لایه FFS

 

فیلم پلی سرلین(Polysurlyn Film )

سرلین یک رزین شفاف و سخت است، که استفاده از آن در فیلم پلی سرلین، باعث آب بندی کامل بسته بندی می شود. از دیگر نکات برجسته فیلم پلی سرلین، نقطه ذوب بالایآن استکه این ویژگی، استفاده از دمای بالاتر رادربسته بندی میسر ساخته و در نتیجه سرعت بسته بندی محصولات مختلف را نیز افزایش می دهد.

نقاط قوت فیلم پلی سرلین

 

طبق بررسی و آزمایشات صورت گرفته توسط شرکت ابداع گران پدیده، فیلم پلی سرلین تولیدی این شرکت، دارای ویژگی های منحصر به فردی به شرح ذیل است :

  • در مقابل آب نفوذ ناپذیر است.
  • در تماس با رطوبت تغییر رنگ نداده، پاره نشده و از بین نمی رود.
  • ضد خش است.
  • با دوام است و در برابر طیف وسیعی از عوامل زیست محیطی مقاوم است.

 

دامنه کاربرد انواع فیلم پلی سرلین:

  • بسته بندی قطعات صنعتی و الکترونیکی
  • شرینک قطعات و محصولات حساس در برابر رطوبت
  • بسته بندی صنایع غذایی
  • بسته بندی خشکبار و حبوبات
  • بسته بندی میوه، صیفی و سبزیجات

 

فیلم بسته بندی اسکین و استرچ (Skin and Stretch Packaging Film)

ظاهر این بسته بندی شکیل و جذاب بوده و همین امر به فروش محصولات کمک می کند. بسته بندی اسکین و استرچ در عین حال که دید کامل از محصول ارائه می دهد، آن را در برابر صدمات حفظ نموده و همچنین احتمال گم شدن قطعات کوچک را به حداقل می رساند. از آنجایی که بسته بندی مانند یک غلاف روی محصول را می گیرد، میزان مواد اولیه مصرفی (برای بسته بندی) و همچنین فضای نهایی اشغال شده توسط محصول، کاهش می یابد. با روش های سنتی، بسته بندی محصولاتی که اندازه استاندارد ندارند بسیار مشکل بوده و فضای زیادی در برمی گیرد، در حالی که با استفاده از بسته بندی اسکین و استرچ می توان بدون کاهش کیفیت، در میزان مواد اولیه مصرفی جهت بسته بندی، صرفه جویی نموده که این امر در نهایت، به کاهش قیمت تمام شده محصول، می انجامد. همچنین کاهش مواد اولیه، میزان ضایعات را کمتر کرده و به حفظ محیط زیست کمک می کند.

 

مزایای استفاده از فیلم پلی سرلین در بسته بندی اسکین و استرچ:

  • بسته بندی را سرعت می بخشد: سرلین اشعه مادون قرمز را با سرعتی دو برابر پلی اتیلن، جذب می کند و با سریع تر نرم شدن در مجاورت حرارت، فرآیند بسته بندی را سرعت می بخشد.
  • مقرون به صرفه است.
  • نقطه ذوب بالای سرلین، امکان استفاده از دماهای بالاتر را میسر می سازد.
  • در برابر سایش و سوراخ شدگی مقاومت بالایی دارد.
  • مقاومت شیمیایی بالایی دارد.
  • در برابر سرمای هوا مقاوم است.
  • در برابر شکنندگی مقاوم است.
  • مانع از خوردگی قطعات فلزی می شود.

 

فیلم شرینک (Shrink film)

فیلم شرینک، پوشش پلاستیکی شفافی است که در دستگاه شرینک پک، به منظور بسته بندی و پوشش، مورد استفاده قرار می گیرد. یک برش از این لایه های شفاف با توجه به اندازه محصول دور آن قرار داده می شود. بعد از عبور دادن محصول از تونلِ حرارتیِ دستگاهِ شرینک پک و خنک کردن آن، در قسمت انتهایی تونل، این پوشش، منقبض شده و به صورت روکشی محصول را در بر میگیرد. از قابلیت های فیلم های شرینک، میتوان به قابلیت بسته بندی کالا در هر شکل و اندازه، استحکام کششی بالا، قابلیت رنگ پذیری و دوخت مناسب، مقاومت مکانیکی بالا در برابر سوراخ شدگی و...اشاره نمود.

امروزه، یکی از ساده ترین و با صرفه ترین راه های بسته بندی، استفاده از فیلم شرینک است و پلی اتیلن از معروف ترین، پرکاربرد ترین و با صرفه ترین ماده هایی است که برای تولید فیلم های شرینک استفاده می شود.

فیلم شرینک تولیدی شرکت ابداع گران پدیده، به صورت یک الی سه لایه و از مواد پلی اتیلن و یا با ترکیبی از پلیمرهای دیگر ساخته می شود. این شرکت می تواند ضخامت فیلم های شرینک را برحسب نوع سفارش تغییر دهد.

 

مزیت فیلم شرینک تولیدی شرکت ابداع گران پدیده:

  • شفافیت بالا
  • مقاومت بالا
  • قابلیت شرینک شدن در حد عالی
  • ضخامت یکنواخت

موارد استفاده فیلم شرینک:

  • پک های آب معدنی، آبمیوه، نوشابه و ...
  • صنایع غذایی(انواع بسته بندی میوه، گوشت، شیر، پنیر و...)
  • تجهیزات پزشکی(کیسه های دارویی و...)
  • صنعت ساختمان (کاشی،سرامیک...)
  • خودروسازی (انواع قطعات خودرو)
  • کارتن

تفاوت شرینک با اسکین/استرچ:

فیلم های اسکین و شرینک غالباً با هم اشتباه گرفته می شوند چرا که در هر دو از پلی اتیلن استفاده می شود. درحالی که کاربرد متفاوتی دارند:

فیلم شرینک را آزادانه روی یک (یا چند) کالا قرار داده، با استفاده از گرما، جمعش می کنند. این فیلم وقتی در معرض حرارت قرار می گیرد دور محصول جمع شده و یک روکش چسبان به آن را تشکیل می دهد.

فیلم اسکین/استرچ به گونه ای فرموله شده است که قابلیت کشش دور کالا را داشته باشد. فیلم اسکین به خاطر داشتن مشخصه هایی چون توانایی کششی بالا و چسبندگی می تواند به صورت یک غلاف محافظ چسبان، روی محصول را دربرگیرد.

 

فیلم های پلی اتیلن سه لایه FFS(Form-Fill-Seal)

فیلم سه لایه پلی اتیلن FFS فیلم استاندارد مورد استفاده در صنایع پتروشیمی و سایر صنایع بسته بندی است. استفاده از کیسه های پلی اتیلن در مقایسه با سایر روش های بسته بندی(کاغذ، پلی پروپیلن و ....)، موجب کاهش ضایعات، انرژی مصرفی و گازهای گلخانه ای می شود.

 

موارد استفاده فیلم سه لایه FFS:

  • بسته بندی انواع مواد گرانولی و پودری (ازجمله محصولات پتروشیمی)
  • کودهای شیمیایی
Page 1 of 5

INNOVATOR AND PIONEER MANUFACTURER OF INSULATION POLYKRAFT, SUPERPOLYKRAFT AND POLYSURLYN JACKETING IN IRAN

MANUFACTURER OF THREE-LAYER POLYETHYLENE AND POLYSURLYN FILMS

MANUFACTURER OF SEAMLESS ALLOY STEEL TUBES

 

.All rights reserved for E.G.P. Co

Copyright © 2023

Web Design By Nonegar