مطالب سایت

مطالب سایت

polyfilm

Polyfilm(Super-Polykraft) Moisture Barrier (PFMB)

 

 

Be aware of SRBs!

After much studies and research being conducted, the new product of E.G.P. Company designated with the trademark Super-Polykraft was manufactured as a novel generation of aluminium jacketing with Polyfilm liner resistant against microbial corrosion.

Corrosion has been one of the most considerable problems of industries including petroleum, water distribution, and power plants for long. It not only imposes high costs of maintenance but also results in production shutdown, lengthening of repair duration, occurrence of disastrous incidents, and consequently, could inflict huge losses such that the respective losses in countries like England, Australia, Germany, and Japan is estimated to be around 1 to 5 percent of the gross domestic product (GDP). Contribution of microbial corrosion in the total costs of corrosion in the aforementioned industries is approximately 50%.

The reason behind use of moisture barrier is prevention of infiltration of any moisture into the metal and protection of the internal surface of the metal jackets against corrosion. Sulfur compounds are used in kraft paper production process; the respective compounds provide the conditions for generation of spores and fungi in contact with moisture, and gradually, start to decompose the paper. And, corrosion occurs if the polyethylene film coating is imperfect. The agent of this adverse phenomenon is Sulphate Reducing Bacteria (SRB). We have found a solution to cope with SRBs via replacing the Polykraft Moisture Barrier (PMB) with Polyfilm Moisture Barrier (PFMB).  It is worth noting that the achievement of these efforts and research has been confirmed by Research Institute of Petroleum Industry (Iran).

 

Thanks to its two polyethylene layers at two sides of the kraft paper, PFMB prevents moisture from transferring into the paper, and on the other hand, acts as an electrical insulator leading to prevention of formation of galvanic cell and corrosion occurrence. The principal superiority of this moisture barrier compared to polykraft liner is prevention of growth and proliferation of SRB bacteria and further protection of the insulator.

 

polysurlynلفاف آلومینیومی محافظ عایق با آستری پلی سرلین (PSMB)

 

 

شرکت ابداع گران پدیده ، پس از بررسی و مطالعات بسیار و به منظور به روز رسانی و همگامی با استانداردهای جهانی محصولات خود، با جایگزینی آستری مناسب پلی سرلین "PSMB"(polysurlyn Moisture Barrier)  به جای "PMB"((Polykraft  Moisture Barrierاز وقوع خوردگی های میکروبیولوژیکی "MIC"(Microbiologically Influenced corrosion ) و خوردگی های زیر عایق " CUI"(Corrosion under Insulation) و به منظور جلوگیری از ایراد صدمات سنگین مالی به تجهیزات و تاسیسات پتروشیمی، پالایشگاهی، نیروگاهی و همچنین تولید محصول سازگار با محیط زیست، اقدام موثری بعمل آورده است.

بر اساس آمار موجود، برای تهیه ۱۰۰۰ كیلوگرم كاغذ، باید ۱۵ اصله درخت سبز تنومند و زیبا را قطع كرد . درختانی كه شش های كره زمین محسوب میشوند و لطافت و پاكیزگی هوای تنفسی انسانها به وجود آنها بستگی دارد؛

در این راستا، شرکت ابداع گران پدیده، محصول جدید آلومینیوم جکتینگ خود را برای اولین بار در ایران، با آستری پلی سرلین معرفی می کند.

پلی سرلین دارای مقاومت موثر در برابر خوردگی زیر لفاف های فلزی لوله ها و تجهیزات می باشد.

وقتی در محیطی، رطوبت وجود داشته و لفاف فلزی با آن در تماس باشد، بروز خوردگی، حتمی است. این پدیده، در تمامی اجراهای (گرم، سرد، روی سقف، صنعتی، تجاری و...) و با همه نوع عایقی، رخ می دهد.

پلی سرلین در اجراهای سرد و گرم لوله و مخازن، مانعی در مقابل خوردگی در سطح داخلی لفاف و همچنین سدی در برابر خوردگی گالوانیک لفاف یا لوله و تجهیزات در اجراهای گرم، فراهم می کند.

استفاده از این فیلم سه لایه پلی سرلین"PSMB"(PolySurlyn Moisture Barrier) ، مانع ایجاد سوراخ های بسیار ریز (Pin holes) در سطح داخلی لفاف های فلزی می شود.

نقاط قوت پلی سرلین (Polysurlyn Advantages ):                

  • جذب پایین آب، در مقایسه با کاغذ کرافت
  • تغییر رنگ ندادن، پاره نشدن و از بین نرفتن در تماس با رطوبت
  • خاصیت ضد خش در هنگام نصب
  • دوام طولانی مدت و مقاومت بالا در برابر دامنه وسیعی از انواع عوامل زیست محیطی لفاف های فلزی با آستر "PSMB"، دارای استاندارد ASTM E84، با عملکرد در مقابل دود و آتش 25/50 می باشند.
  • لفاف های آلومینیومی با آستر "PSMB"، استاندارد Class A، ASTM C1729 را برآورده می کنند.
  • می توان به "PSMB" نگاهی به عنوان یک سرمایه گذاری کوچک یا "بیمه" ای برای محافظت لفاف های فلزی و لوله های با ارزش، داشت.
  • لفاف های فلزی خورده میشوند، مگر اینکه از پلی سرلین استفاده شود.
پلی سرلین پلی کرافت
سه لایه فیلم کو اکسترودد(co-extruded) دو لایه فیلم( پلی اتیلن + کاغذ)
حذف حفره های سوزنی، باعث خاصیت ضد آبی می شود وجود حفره های سوزنی، باعث تماس رطوبت با فلز می شود
جذب آب وجود ندارد،در نتیجه تماس فلز با آب امکان ندارد. لایه در معرض ،کاغذ است که جاذب آب است.

 

 

polykraft

 

 

Insulation is among the highly significant issues in large-scale facilities and factories including refineries and power plants because use of insulators leads to saving in costs via reduction of heating and cooling energy losses, and, helps environment conservation, process control, and also, safety enhancement. It is inevitable to utilize insulator protection jacketing to protect the insulator itself against detrimental ambient agents as well as mechanical damages and also to maintain the efficiency of insulators for longer duration.  

Nowadays, among variety of metallic insulator protection metal jackets, aluminum jacketing is the more popular compared to other counterparts due to its low weight, high flexibility and resistance against corrosion.

E.G.P. Aluminum Jacketing products are typically manufactured using alloys 1000 and 3000 in accordance with “ASTM B209” and “EN 485” standards. Different types of aluminum jacketing with Polykraft Moisture Barrier (PFBM) manufactured by this company are divided into four categories, as below:

  1. Smooth aluminum jacketing in rolls of 1 meter width, thickness ranging from 0.25 through 1.2mm & length upon request.
  2. Smooth aluminum jacketing sheets, thickness ranging from 0.25 through 1.2mm, 1m width and 2m length.
  3. Corrugated aluminum jacketing rolls (5mm corrugation) of thickness ranging from 0.25 through 0.5mm, width 1m and length 30m.
  4. Deep corrugated aluminium jacketing sheets (32 mm corrugation) thickness ranging from 0.25 through 1.2mm, width 0.92m and length 2m.

 

 

polysurlyn

PolySurlyn Moisture Barrier(PSMB)

 


Ebdaagaran Padide Co., after many years of research and in order to comply with the latest global standards, introduces " PSMB " (Polysurlyn Moisture barrier) as a replacement for "PMB" (Polykraft Moisture Barrier.) This new product, in addition to being an environmentally friendly product, will prevent huge financial damages caused by " MIC "  (Microbiologically Influenced Corrosion) and "CUI" (Corrosion Under Insulation) to equipment used in petrochemical utilities, power plants and refineries.
According to existing statistics, for producing 1000 kg of paper, 15 trees need to be cut. Trees which are considered to be the lungs of our beautiful planet and ensure the health of our atmosphere.

In response, Ebdaagaran Padide Co. introduces its new aluminium Jacketing product with Polysurlyn layer for the first time in Iran.

Polysurlyn is resistant to corrosion under jacketing of metal pipes and equipment. When there is moisture in atmosphere and the metal jacketing is in contact with it, corrosion is inevitable. This phenomenon will occur in any type of implementation (cold, hot, over-the-roof, industrial, and commercial) regardless of the type of insulation.
Polysurlyn used in hot or cold implementations of pipes and storage tanks will act as a barrier to corrosion of internal layer of the jacketing and galvanic corrosion of jacketing, pipe or hot-implemented equipment. Meanwhile, using this polysurlyn 3 layer film (polysurlyn moisture barrier) will prevent formation of pin holes on internal layer of metal jacketings.

Polysurlyn advantages include:
-    Low water absorption in comparison to polykraft paper.
-    No color change, no tearing and no destruction while in contact with moisture.
-    Resistant to scratching during installation.
-    High durability and resistance to a wide range of environmental factors threatening metal jacketings with PSMB layer with ASTM E84 and with a fire resistance rating of >25/50.
-   Aluminium jacketing with PSMB layer are in compliance to ASTM C1729 Class A standard.
-    PSMB can be considered as a small investment and as insurance for protection of valuable metal jacketings and pipes.
-    Metal jacketings will be corroded unless Polysurlyn is used.

 

Polysurlyn PolyKraft
Three layers of co-extruded film   Two layers (PE+Paper)
Omitting pin holes will cause water resistant properties Pin holes will cause contact of moisture with metal
No water absorbing, therefore no contact between metal and water The layer is in contact with paper which is an water absorbent in itself

polyfilm
لفاف آلومينيومی محافظ عايق با پلی فيلم PFMB

 

مراقب SRB ها باشید!

 

 

بعد از مدت ها تحقیق و بررسی، محصول جدید شرکت ابداع گران پدیده با نام تجاری سوپر پلی کرافت، نسل جدید Aluminum Jacketing با آستری Polyfilm مقاوم در مقابل خوردگی میکروبی،  به مرحله تولید رسید.

 مسئله خوردگی از دیرباز یکی از مشکلات صنایعی چون نفت، توزیع آب و نیروگاه های برق بوده که نه تنها باعث تحمیل هزینه های بالای نگه داری شده بلکه باعث توقف تولید، تطویل زمان تعمیر، بروز حوادث ناگوار و متعاقباً ایجاد خسارات هنگفت نیز می شود؛ به طوری که این خسارت در کشورهای انگلستان، استرالیا، آلمان و ژاپن حدود 1 تا 5 درصد تولید ناخالص ملی تخمین زده می شود. سهم خوردگی میکروبی از کل هزینه خوردگی در صنایع مذکور حدود 50% است.

علت اصلی استفاده از آستر عایق رطوبتی (Moisture Barrier)، جلوگیری از نفوذ هر گونه رطوبت به فلز و حفاظت سطح داخلی لفاف های فلزی در مقابل خورگی می باشد. در پروسه تولید کاغذ کرافت، از ترکیبات گوگردی استفاده می شود که در تماس با رطوبت شرایط را برای تولید هاگ و قارچ فراهم کرده و به تدریج شروع به از بین بردن کاغذ می کند. و چنانچه پوشش فیلم پلی اتیلن کامل نباشد خوردگی فلز رخ می دهد؛ عامل ایجاد این ضایعه (Sulphate Reduced Bacteria (SRB می باشد. ما با جایگزین کردن آستر پلی فیلم (PFMB) به جای آستر پلی کرافت (PMB)، راه حل مقابله با SRB ها را یافته ایم! شایان ذکر است که نتیجه این تلاش و تحقیق، مورد تأیید پژوهشگاه صنعت نفت ایران قرار گرفته است.

آستر پلی فیلم، با داشتن دو لایه پلی اتیلن در دو طرف کاغذ کرافت، از یک طرف، مانع انتقال رطوبت به کاغذ شده و از طرف دیگر، در تماس با فلز، عایق الکتریکی بوده که سبب جلوگیری از تشکیل پیل گالوانیک و مانع بروز خوردگی می شود. برتری اصلی این آستر نسبت به آستر پلی کرافت، جلوگیری از رشد و نمو باکتری های SRB و حفاظت بیشتر از عایق می باشد.

 

polykraft

 

 Polykraft Moisture Barrier (PMB)

 

 

عایق کاری یکی از مسائل حائز اهمیت در تأسیسات و کارخانجات بزرگ، از قبیل پالایشگاه ها و نیروگاه ها، می باشد. چرا که استفاده از عایق، باعث صرفه جویی در هزینه ها با کاهش اتلاف انرژی حرارتی و برودتی، کمک به حفظ محیط زیست، کنترل فرآیند و همچنین افزایش ایمنی می شود. جهت محافظت از خودِ عایق در مقابل عوامل مخرب جوی و صدمات مکانیکی و همچنین برای حفظ راندمان عایق ها برای مدت زمان طولانی تر، استفاده از لفاف های محافظ عایق، امری غیر قابل اجتناب است.

امروزه در جهان، از میان انواع لفاف های فلزی محافظ عایق، لفاف آلومینیومی، به علت داشتن وزن کم، انعطاف پذیری بالا و مقاومت در برابر خوردگی، نسبت به سایر لفاف های فلزی محبوبیت بیشتری دارد.

شرکت ابداع گران پدیده برای تولید محصولات لفاف آلومینیومی خود، از آلیاژ های گروه 1000 و 3000  مطابق با استانداردهای  “ASTM B209” و “EN 485”بهره می برد.

انواع لفاف های آلومینیومی با آستری پلی کرافت تولیدی این شرکت، به دسته های ذیل تقسیم می گردند:

  • کلاف های آلومینیوم ساده با آستری پلی کرافت از ضخامت های 0.25 الی 1.2 میلی متر
  • کلاف های آلومینیوم کرکره گام 5 میلیمتر با آستری پلی کرافت از ضخامت های 0.25 الی 0.5 میلی متر
  • ورق های آلومینیوم کرکره گام 32 میلیمتر با آستری پلی کرافت از ضخامت های 0.5 الی 1.2 میلی متر به طول دلخواه، بنا بر سفارش 

 

INNOVATOR AND PIONEER MANUFACTURER OF INSULATION POLYKRAFT, SUPERPOLYKRAFT AND POLYSURLYN JACKETING IN IRAN

MANUFACTURER OF THREE-LAYER POLYETHYLENE AND POLYSURLYN FILMS

MANUFACTURER OF SEAMLESS ALLOY STEEL TUBES

 

کلیه حقوق این سایت متعلق به شرکت ابداع گران پدیده بوده

و هر گونه کپی برداری از آن قابل پیگرد قانونی است.
Copyright © 2023 E.G.P. Co.

طراحی سایت توسط نونگار